| TYPE | Portable, lightweight, 60 kV dc vacuum bottle tester | 
            
              | PHYSICAL SPECIFICATIONS | 16.8”W x 3.5”H x 10.6”D (42.7 cm by 8.9 cm by 26.9 cm); Weight: 10 lbs (4.53 kg) | 
            
              | INPUT POWER | 2 amps, 90-240 Vac, 50/60 Hz | 
            
              | OUTPUT VOLTAGE | 10kV – 60 kV dc in 5 kV steps | 
            
              | OUTPUT RIPPLE VOLTAGE | 3% max | 
            
              | DISCHARGE TIME | Maximum discharge time for internal high voltage is 0.3 seconds | 
            
              | DISPLAY | Back-lit LCD Screen (16 characters by 2 lines); viewable in bright sunlight and low-light levels | 
            
              | FAILURE INDICATOR | Failure indicator LED illuminates when test current exceeds 100 μA, 200 μA, 300 μA (programmable) | 
            
              | CONTROL | Single turn-and-press knob | 
            
              | COMPUTER INTERFACE | RS-232C port (19,200 baud) for factory calibration and diagnostics | 
            
              | ENVIRONMENT | Operating: -10°C to 50° C (15°F to +122° F); Storage: -30° C to 70° C (-22°F to +158° F) | 
            
              | CABLES | One 10-foot high-voltage cable, one 10-foot high voltage return cable, one ground cable, one power cord | 
            
              | TRANSPORTATION CASE | Transportation case is included | 
            
              | WARRANTY | One year on parts and labor | 
            
              | Specifications are valid at nominal voltage and ambient temperature of +25C (+77F). Last updated on February 16, 2009
 |