臺灣SEW 168CB線路追蹤計(jì)與非接觸式電壓檢測計(jì)

Multi-purpose Tone Generator

● Four transmitter plug types
    - RJ-11          -  RJ-45
    - COAX        -  Alligator clips   
● Two unique audible tones:
    - Fast alternating tone
    - Slow alternating tone   
● Telephone line polarity check 
    - Tip side
    - Ring side
● Cable tracing 
● Telephone line status check
    - Clear line
    - Busy line 
    - Ringing line 
● Continuity check.
● Transmitter plug storage.
● Easy to store different kinds of transmitter 
   plugs (RJ-11, RJ-45, COAX, and alligator clips).
● Easy to carry.
● Flashlight function.

Amplifier Probe

● The Amplifier Probe is designed to identify
   and trace wires or cables within a group  
   without damaging the insulation.
● Works with any Tone Generator to identify wires. 
● Volume control for increased sensitivity and
   adjustable to suit work environment.
● Recessed ON/OFF button prevents battery drain. 
● A phone jack is designed for headset or handset.       

Non-contact Voltage Detector

● Non-contact voltage detection :   
   50V ~ 1000V AC        
● Frequency : 50 ~ 500 Hz 
● Measurement category : CAT IV 1000V.     
● Indication : LED and Tone 
● Bright LED and audible alarm sound  when voltage is present.   
● Designed for Non-contact voltage  detection. It's safer.        
● Can be used to find a break in a wire. 
● Flashlight function.
● NCV Test button design. 
● Operating Conditions :
    Temperature : 0 ~ 40°C 
    Humidity : Less than 80% R.H. 
    Altitude : 2000 m (6500 feet) maximum 
● For indoor use only. 
● Pollution degree : 2.