核心提示:FEATURESLan Cable Tester● Designed for RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring...

| FEATURES | 
| Lan Cable Tester ● Designed for RJ45/RJ11 modular cables, 10/100base-T cable and Token Ring cable etc.
 ● The Lan cable tester can verify cable continuity,
 open, circuit and miss-wired.
 ● The remote receiving unit is available for installed
 cables far away either on the wall plates or on the
 patch panels.
 ● Auto and manual scan function.
 ● Ground wire test.
 ● Display : LED indication for wire status.
 
 Digital Multimeter
 ● 4000 counts LCD.● Full automatic measurement.
 Voltage measurement.
 Resistor measurement.
 ● Range change function.
 ● Select function.
 ● Data Hold function.
 ● Continuity check.
 ● Diode measurement.
 ● Low battery indication.
 ● Input impedance:10MΩ.
 | 
|  | 
| SPECIFICATIONS | 
| | Digital Multimeter |  | AC Voltage |  | | Range | : | 400mV / 4V / 40V / 400V / 750V |  | Resolution | : | 0.1mV / 1mV / 10mV / 100mV / 1V |  | Accuracy | : | ±(1%rdg+5dgt) | 
 |  |  |  | DC Voltage |  | Range:400mV / 4V / 40V / 400V / 1000VResolution:0.1mV / 1mV / 10mV / 100mV / 1VAccuracy:±(0.5%rdg+3dgt) |  |  |  | Resistance |  | Range:400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩResolution:0.1Ω / 1Ω / 10Ω / 100Ω /1kΩ / 10kΩAccuracy:±(1.2%rdg+3dgt) / ±(2.0%rdg+4dgt) |  |  |  | Continuity Test |  | Range:400ΩAudible |  | threshold:Less than 25Ω |  |  |  | | Safety standard | : | EN 61010-1 EN 61326-1 | 
 | 
 |