HEAVY DUTY INSULATED GIN WITH SWIVEL SHEAVE HEAD
•  Unit can be installed in two sections for easy installation
•  Swivel head rotates and locks at 45° intervals
•  Swivel head, sheaves and saddles are made from high strength aluminum alloy
•  Head can be swivelled with transformer load
•  Nylon straps should be inspected prior to each use for wear, cuts, and degradation from exposure to ultra 
violet rays.  Suspect straps should be replaced before use.
| CAT NO | “A” | “B” | “C” | WORKING LOAD LIMIT (SEE PAGE 811) | LBS | 
| 9434 | 36” | 20” | 45” | 3800 LBS | 49.0 | 
| 5800-7 | SAME AS 9434 EXCEPT WITH RATCHET
  AND STRAP | 47.0 | |||
| 12393 | 48”              34”            57”           3800
  LBS | 52.0 | |||
| 5800-8 | SAME AS 12393 EXCEPT WITH RATCHET
  AND STRAP | 50.0 | |||
| 5049 | REPLACEMENT NYLON STRAP - 2” WIDE X
  44” LONG - WITH HOOK | 0.8 | |||
| DIMENSIONAL REFERENCE: LOAD LINE IS 12” FROM FALL LINE FALL LINE IS 5 1/2” FROM FACE OF
  POLE | |||||



CROSS ARM GIN
•  Rope blocks can be installed in lower ring before 
installing gin
•  Shotgun engages long eye to hang gin on arm while 
lineman is in safe position below
•  Made of bronze alloy
•  Working load limit 1,000 lbs.
• Fits arms up to 3 1/2” wide
CAT NO DESCRIPTION LBS
5742-23 CROSS ARM GIN 2.2
CONVERTIBLE CROSS ARM GIN
•  Base assembly will accept either the 2 1/2” O.D. x 31” long mast or 3” O.D. x 58” long mast.  
This feature allows operating personnel maximum lifting heights and safe working load limits.
•  Base assembly is constructed with aluminum alloy parts and base plates are reversible to allow 
gin to be used on 3 1/2” wide x 4 1/2” high or 4 3/4” wide x 5 3/4” high cross arms.
•  Aluminum plate support on base prevents damage to cross arms in load bearing areas.
| CAT NO | DESCRIPTION | DIMENSION | WORKING | LBS | |
|  |  | “A” | “B” | (SEE PAGE 811) |  | 
| 5570 | COMPLETE GIN ASSEMBLY WITH ITEM 5574 BASE AND ITEM 5572
  MAST | 21 3/4” | 28 1/4” | 600 LBS | 17.2 | 
| 5571 | COMPLETE GIN ASSEMBLY WITH ITEM 5574 BASE AND ITEM 5573
  MAST | 48 3/4” | 54” | 800 LBS | 27.0 | 
| 5574 | CONVERTIBLE BASE ASSEMBLY ONLY |  |  |  | 11.8 | 
| 5572 | 2 1/2” O.D. X 31” LONG MAST ONLY | 21 3/4” |  | 600 LBS | 5.4 | 
| 5573 | 3” O.D. X 58” LONG MAST ONLY | 48 3/4” |  | 800 LBS | 15.2 | 







 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
                 
            
  			